Cellpro Dual PowerLab 8x2 with dual EC5 input cables, 2688W, Multichemistry Battery Workstation

For Battery types: Lithium Polymer (1s to 8s balanced, 1s to 2s unbalanced), Lithium Ion (1s to 8s balanced, 1s to 2s unbalanced), Lithium Manganese (1s to 8s balanced, 1s to 2s unbalanced), A123 
(LiFePO4) (1s to 8s balanced, 1s to 9s unbalanced), NiCd (1s to 21s), NiMH (1s to 21s), 6v, 12v, 24v Lead Acid batteries (Flooded, Gel, AGM, SLA)
 
Pack capacity: 20 mAh to 360Ah. 
 
Input voltage: 10-48VDC, reverse polarity protected. Each channel may be operated on separate power supplies using 110V/15A isolated circuits for best results. Additionally both channels may be 
operated on one power supply provided packs on each channel are isolated. 
 
Input current: 1A to 40A, software limited 
 
Power conversion: Synchronous DC/DC converter, supports multiple switcher frequencies of 31.25 kHz, 62.5 kHz, 125 kHz; user selectable by preset, 85% to 93% efficiency depending on output 
current 
 
Output battery charge current: Adjustable range 10mA to 40A, limited by 40A input current* 
 
Output battery discharge current: Internal discharge 10mA to 10A, 95W max 
Regenerative discharge 10mA to 40A, 1344W max** 
 
Continuous max output power: 408W @ +12VDC input, 1344W @ +39.53VDC 
 
Cell balancing: Resolution 78uV (16 bit) for 1s-8s Li or A123 (LiFePO4) balanced charging 
 
Voltage calibration: Cell voltage measurements are factory calibrated to a standard traceable to NIST; calibration is to +/- 6 mV 
 
Current calibration: Charge current is factory calibrated on a 4A standard; calibration is to +/- 1mA 
 
Measurement accuracy: 
Voltage resolution: 78uV (16 bit) 
Voltage tolerance: +/- 6mV 
Charge current: +/- 1% 
Capacity added to pack: +/- 1% 
Percent capacity (“Fuel”): +/- 5% (with accurate fuel table defined for battery being charged) 
 
Serial data output: 19.2kbps, 8 bits, 1 start bit, 1 stop bit, no parity 
 
Data integrity: Checksum, CRC checking 
 
Size: 10.24 in. (260mm) L x 5.55 in. (141 mm) W x 3.03 in. (77 mm) H 
 
Cooling fans: 13 CFM, 50mm diameter 
 
Heat sink: Internal 120W aluminum, thin finned 
 
Output battery connector: “Cellpro” compatible, JST PA series, 9 position 
 
LCD: 2 line, 16 character, light grey/blue backlit 
 
Footnotes: 
* Please note, for safety reasons, available charger current may be limited for certain battery types and/or charging modes, e.g., non-balanced charge of Li 
** Please check bullet number 8 in the section titled “Major Features” below for a detailed description of Regenerative Discharge 

Write a review

Please login or register to review

Cellpro Dual PowerLab 8x2

  • Brand: Revolectrix
  • Product Code: POWERLAB8X2
  • Availability: In Stock
  • $369.95


Related Products

24v 1100w Power Supply for icharger duo powerlab 6 8 Hyperion 4mm jacks

24v 1100w Power Supply for icharger duo powerlab 6 8 Hyperion 4mm jacks

These are converted computer file server power supplies.  Very high power, very efficient, very..

$80.00

12v 575w Power Supply for icharger duo powerlab 6 8 Hyperion 4mm

12v 575w Power Supply for icharger duo powerlab 6 8 Hyperion 4mm

  These are converted computer file server power supplies.  Very high power, very effic..

$40.00