Charger Comparison
COMPARE	406 DUO	308 DUO	4010 DUO	POWERLAB 8x2
Cell Count	6S	8S	10S	8S
Input Voltage	10-30VDC	10-30VDC	9-50VDC	10-48VDC
Input Current MAX	<60A	<60A	<65A	<40A
Charge Current MAX	40A	30A	40A	40A
Discharge Current MAX	40A	30A	7A	10A
Charge Power MAX	1400W	1300W	2000W	2688W
Discharge Power MAX	140W	120W	200W	190W
Regenerative Power MAX	1400W	1300W	2000W	2688W
Balancing Capacity	1.2A	1.2A	1.2A	1A
USB Charging Port	5V 1A	5V 1A	N/A	N/A
Dimension (mm)	171×118×59	171×118×59	210x140x81	260x141x77
Weight	0.91kg	0.91kg	1.47 Kg	TBD
MSRP	299.99	279.99	349.99	379.99

Specifications
Input voltage range: 10.0—30.0VDC
Maximum input current limit: <60A, CH1/2<47A
Maximum charge/discharge current: 70A@Syn. Mode 40A@Asyn. Mode
Maximum charge power capacity: 1400W (Channel 1000W @input > 23.5V)
Maximum discharge power capacity: 140W (Channel 80W)
Maximum regenerative discharge power capacity: 1400W (Channel 1000W)
Maximum extra discharge power capacity: 2000W (Channel 1000W @25V/40A)
Maximum current drain for balancing: 2.4A@Syn. Mode 1.2A@Asyn. Mode
USB charging port: 5V/1A（current-limiting protection 1.2A）

Net weight: 0.91kg

Dimension: 171×118×59 ±0.5mm

406DUO Special Features

1 The 406DUO uses advanced Synchronous buck-boost DC/DC converter technology, high power, a high current and

high-performance power conversion circuit. The maximum charge power capacity is up to 1400W, the maximum

charge/discharge current of a channel is up to 40A, and two channels in Synchronous Mode are up to 70A.

2 Each channel supports 6s LiPo, Lilo, LiFe and NiZn batteries, with maximum 1.2A balance current, and adopts a

unique balance calculation of internal resistance correction. Supports 1-20s NiMH/NiCd batteries and 1-12s Pb

batteries.

3 With 1A/5V USB charging port, convenient for the user to charge mobile phones and PCs.

4 When the channel output connects the battery after the charger powers on, it will start automatically the

anti-sparking protection.

5 Intelligent fan control. Sensing internal temperature via the internal temperature sensor, to thereby control the fan

speed.

6 Internal temperature protection. When the internal temperature exceeds the Power Reduce temperature, the output

power is automatically reduced; and the charger will shut down when temperature exceeds the Shut-down

temperature.

7 This charger can save 64 parameters sets and support the data import/export to SD card.

8 A 2.8-inch LCD screen provides rich information including current, voltage, power, capacity, internal resistance,

control status, time-consuming and temperature, etc.

9 Multi-discharge features: self-discharge, regenerative to input discharge, and lithium battery extra expanding

discharge.

10 Supports measurement for internal resistance of battery offline and online. Can measure not only the internal

resistance of the entire battery pack, but also measure the internal resistance of each cell within the lithium battery.

11 The iCharger has protection for reversed polarity (input or output), input voltage/current, battery temperature,

charging capacity, overrun time and maximum power etc.

12 Supports upgrading the hardware program by USB port or SD card. The iCharger also supports the “Logview”

software and can display, plot and analyze the charge and discharge data by it. (See detailed information about

Logview at the following website: http://www.logview.info)

iCharger 406 Duo 1400W 40A 6S Dual Port Charger

Brand: Junsi iCharger
Product Code: JNS-406BDUO
Availability: In Stock

$299.99

Available Options

Power Supply Combo

Qty

0 reviews / Write a review

Write a review

iCharger 406 Duo 1400W 40A 6S Dual Port Charger

$299.99

Available Options

Related Products

24v 1100w Power Supply for icharger duo powerlab 6 8 Hyperion 4mm jacks

12v 575w Power Supply for icharger duo powerlab 6 8 Hyperion 4mm

406 DUO RTR Charging Case by Radiocontronics